Hurco Power Smoker 2 Reference Manual And User'S Guige Download Page 9

www.GETHURCO.com

1-800-888-1436

www.GETHURCO.com

7

Troubleshooting

Troubleshooting

Power Smoker 2 Specifications

Question

: Why is my Power Smoker 2 spitting out too much LiquiSmoke?

Answer

: The valve on the Power Smoker 2 that controls the flow of the LiquiSmoke is open too far. This will allow too much 

fluid to enter the Smoke Generator causing it to cool and not properly atomize the LiquiSmoke. It is advisable to practice 

with the Power Smoker 2 to determine the exact position of the flow control valve to produce the maximum smoke with little 

wasted LiquiSmoke prior to use on a job. A small amount of fluid emitting with the smoke is normal.

Question

: Why isn’t my Power Smoker 2 producing dense smoke?

Answer

: The LiquiSmoke flow control valve is open too far causing the smoke generator to cool. Close valve and allow excess 

LiquiSmoke to burn off. Now open the valve slowly until you reach maximum smoke generation. This will only take a fraction 

of a turn on the LiquiSmoke flow control valve.  

Limited Warranty

When used in accordance with instructions, HURCO Technologies, Inc. will replace to the original purchasers, 
free of charge, any part or parts of the Power Smoker 2 unit, excluding the engine, found to be defective in 
material or workmanship or both; this is the exclusive remedy. All transportation charges on parts submitted 
for replacement under this Warranty must be borne by the purchaser. The engine is warranted as outlined by 
the engine manufacturer’s separate, limited warranty only.  This warranty does not cover damage or loss to the 
Power Smoker 2 unit from operating negligence, or due to accident or other casualty. 

 THERE IS NO OTHER 

EXPRESS WARRANTY OR IMPLIED WARRANTIES. THIS WARRANTY IS LIMITED TO A PERIOD OF ONE YEAR 
FROM THE DATE OF PURCHASE AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL 
IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE HEREBY EXCLUDED, TO THE EXTENT PERMITTED BY LAW. IN NO EVENT SHALL WARRANTOR 
BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL AND CONSEQUENTIAL DAMAGES RESULTING FROM ANY 
DEFECT IN THE GOODS, TO THE EXTENT SUCH AVOIDANCE IS PERMITTED BY APPLICABLE LAW. 

CFM Rating 

The Hurco Power Smoker impellers were tested in accordance with AMCA (Air Movement and Control Association) standards. 

Power Smoker 2 – up to 700 CFM @ 8.0 static pressure 

Engine 

Honda GXH50 2.1 HP engine, Air-cooled, 4-Stroke, OHV, single cylinder. 

Note: Refer to engine manufactures manual for warranty information and maintenance instructions. 

Included Equipment

6 feet of 4 inch flexible duct

LiquiSmoke pressure tank

LiquiSmoke

Approximately 3 hours of smoke delivery out of one gallon of LiquiSmoke.

Summary of Contents for Power Smoker 2











Reviews: