HANDLING MANUAL
SERVICE MANUAL
RAYPAK HI DELTA BOILERS/WATER HEATERS
WITH FAN ASSISTED PREMIX BURNERS
26
3.1.1.
Changing the flue outlet on site of the installation
Follow these instructions to change the flue connection from
the standard top location to the rear of the appliance (when the
optional vent tee is ordered).
-
Turn off every electric supply leading to the appliance!
-
Close the gas cock leading to the appliance!
-
Remove the screws, gaskets and round dustcover from
the rear of the heater!
-
Remove the screws, stainless steel flue cover and gasket
from the branch side of the tee located in the flue box
at the rear of the appliance!
-
Remove the screws, retaining ring and rain gasket from
the top of the appliance!
-
Remove the screws, flue collar and gasket from the
run side of the tee located in the flue box on the top
of the appliance!
-
Reverse the components and reattach them so that the
flue outlet would be on the rear of the appliance and
the stainless steel flue cover would close the top of the
tee! Make sure that the gaskets are perfectly sealed to
avoid any flue gas spillage! The silicone vent gaskets
must be faultless. Replace any torn or worn vent
gaskets!
-
Mount the retaining ring, rain gasket and screws to the
rear of the appliance! Mount the gaskets, round
dustcover and screws to the top of the appliance!
3.1.2.
Reversing the air filter on site of the installation
The air filter, located on the left end of the appliance by the
manufacturer, can be changed to the other end on the site of the
installation.
-
Remove the four screws and the dust cover from the
right hand side of the appliance!
-
Remove the four screws and the air filter bracket from
the left-hand side of the appliance!
-
Reverse the components and reattach in the new
location, making sure that the yellow cadmium-plated
screw on the air filter locking bracket is on the
bottom! (The air filter locking bracket is reversible.)