Section 4
Transport, Initial Operation and Taking Out of Service
Page 16
Transport
Tray transport trolley
TTW/V
91275972_A1
4
Transport, Initial Operation and Taking Out of Service
4.1
Transport
ATTENTION
Damage to appliances caused by improper transport
Appliances should be safely secured when transported off site inside a vehicle
such as a truck. If the appliances are not secured properly, there is a risk of
damage to property and harm to persons caused by squashing.
Secure each individual separate appliance using suitable transport securing
devices.
When loading, use only hoists and load lifting devices approved for the weight of the tray transport trolley.
Only transport vehicles that are approved for the weight of the appliance may be used.
The tray transport trolley is usually delivered as an assembled unit, i.e. it is completely assembled.
The scope of delivery is specified in the shipping documents in accordance with the valid purchase agree-
ment and included with the delivery item.
4.2
Setting up and Putting into Operation
The installation and operation of the tray transport trolley must only be carried out by the manufacturer or
personnel authorised by the manufacturer.
The tray transport trolley should be thoroughly cleaned with a soft cloth before putting it into operation for
the first time. Ensure that the appliance is clean and dry before putting it into operation.
The functioning of the operating elements must be checked before putting it into operation:
INFO
Disposal of packing material
The packing consists of recyclable materials and can be disposed of accord-
ingly. The different materials should be separated and disposed of in an envi-
ronmentally friendly manner. The local agencies responsible for disposal must
be contacted regarding removal
4.3
Storage and Recycling
Appliances must be kept in a dry, frost-free environment when placed in temporary storage. The tray
transport trolley must be kept covered with a suitable covering material to be protected against dust in-
gress.
The appliance kept in the storage location must be checked for damage and corrosion every 6 months.
NOTE
Condensation
Ensure that there is sufficient ventilation and no major variations in tempera-
ture in the storage location, so that condensation is prevented from forming.
NOTE
Temporary storage
Tray transport trolleys that are not operated for a longer period should be
placed in temporarily storage with their doors open to prevent odours forming
in the interior.
The appliance must be clean and dry before it is placed back into use.
If the tray transport trolley is recycled, all operating and auxiliary materials must be disposed in an envi-
ronmentally compatible manner. The recyclable materials must be properly separated and disposed of in
an environmentally compatible manner according to the local Waste Disposal Regulations. The local agen-
