Incounter stacking equipment
Operating instructions
21 / 28
Adjusting the thermostat
Depending on the equipment and the installation
position, the thermostat may not be accessible during
operation.
−
Adjust the thermostat during installation.
For heatable devices, the temperature can be set on the thermostat.
Manual thermostats do not allow the temperature to be set to a precise
degree. Where appropriate, check the temperature setting with a full
load.
Set the control to the desired position.
🡆
You have set the thermostat.
7.3
Loading with items
CAUTION
Risk of injury from overloaded stacking compartment
Items fall out of overloaded stacking equipment. Plates break. Per-
sons are injured.
−
Do not load the guide basket any higher than the upper edge of
the equipment or the load guide.
−
If the guide basket does not lower and it is not yet at full capacity,
adjust the springs.
The lid protects items from environmental influences
and reduces heat loss in the case of heatable equip-
ment.
−
Cover the items with a lid.
1.
Only load the guide basket within the permitted payload.
2.
Do not load the guide basket any higher than the upper edge of
the equipment or the load guide.
3.
Place the items down flat from above.
4.
Load the guide basket evenly.
7.4
Heating the items
Depending on the equipment and the installation
position, the thermostat may not be accessible during
operation.
−
Adjust the thermostat during installation.