AKRON 900A, 901A, 902A, 8900-8, 8901-8, 8902-8, 8904-8
9
3. Operation
Fixed Traction Mounting Bracket (Model 2F1970Z)
The fixed traction mounting bracket comes as standard as part of the traction table. It is fitted to the foot
end of the table to secure the ATP9 Traction Machine.
D
G
A
F
B
H
J
D
C
E
Fitting Instructions
Locate bracket (item A) on to the traction table, by sliding onto the section at the foot end of the table.
Lock bracket in place using an M8 bolt and nut (items B & C), inserting two washers (item D) either side
of the bracket.
Two locking knobs (item E) are screwed into the support member positioned at the base of the top frame
(item F). Tightening these knobs will stabilise the bracket when traction procedures are in progress.
The ATP9 Traction Machine (item G) can then be clamped into place onto the support table platform
(item H). Refer to the ATP9 Traction Machine User Manual for the machine mounting procedure.
WARNING
Ensure that the electrical cord from the ATP9 is coiled away from the rotating
Mounting Platform when in use.
