PAGE 16
Argweld
®
PURgEYE
®
FAMILY RANgE of
WELD PURgE MONITORS
®
The PurgEye
®
200 IP65 Hand Held with PurgeNet™
• Readings from 1,000 down to 1 ppm.
• Internal electro-mechanical pump with 1 l/m flow rate.
• USB lead included to control PurgeLog™ software.
• Long life, faster response sensor.
• Warning alarm levels between 1 and 999 ppm.
• Flow detection for accurate reading of gas samples.
The PurgEye
®
300 Plus with PurgeNet™
• Measures and indicates from 1,000 to 10 ppm (0.001%).
• A unique, fast response, lifetime sensor.
• PurgeLog™ data logging software* included.
• Internal alarm and security pin code facilities.
• 2m x 6mm polypropylene hose for inlet and outlet exhausts.
The PurgEye
®
300 Nano
• ‘New’ unique solid state long life sensor.
• Less than 60 seconds warm up time.
• No need to constantly calibrate, integrally mounted sensor.
• Low cost, small, lightweight monitor reads accurately to 10 ppm.
The PurgEye
®
500 Desk with PurgeNet™
• PurgeLog™ data logging software* included.
• Reads PPM or Percentage.
• Specially designed, extra long life sensor with faster response.
• OLED screen with stunningly clear, bright figures and text.
• Reading from 1000ppm - 1ppm.
• Audible alarm features to indicate low and high levels of oxygen.
• Visual Alarm System as an accessory.
• Integral pump with flow rate 3.5 - 4 l/m.
The PurgEye
®
600 Touch Screen
• Reads PPM or Percentage.
• PurgeLog™ data logging software* included.
• Large touch screen with on-screen graph of the current weld.
• Internal sampling pump with gas filtration.
• User port with two outputs to control welding equipment or activate alarms in the event of a rise in oxygen levels.
• No more wet cells to keep replacing and recalibrating.
• Quick fit and quick disconnect ‘leak tight’ purge tube fittings.
The PurgEye
®
1500 Site IP68 with PurgeNet™
• Internal electro-mechanical pump with 3 l/m flow rate.
• USB lead included to control PurgeLog™ software.
• IP65 rated with the lid open, IP68 with lid closed.
• Warning alarm levels between 1 and 999 ppm.
• Flow detection for accurate reading of gas samples.
• Power on / off with standby button for sensor warm up.
The PurgEye
®
1000 Remote with PurgeNet™
• Comes with a hand held display and a 10 m lead as standard.
• Optional 100 m reel of outdoor cable with locking connectors.
• Reels of extensions cable can be connected to make longer leads upto 1 km!
• Easy to pull through pipes.
• 1” ø stainless sensor holder to place at the weld site inside pipes to send purge data to the monitor up to 1km away.
The World standard PurgEye
®
100 IP65 Hand Held
• Push button ‘Auto Calibration’ feature at precisely 100 ppm as well as at ambient (20.94%).
• Leak tight probe assembly.
• Low battery indicator and low sensor indicator.
• Increased sensor reading range.
• Quick connect/disconnect leaktight fittings for gas purge tubing.
PurgeNet™ controls the welding power sources such as orbital welders and any other automatic welding systems
to switch on and off
according to oxygen levels, transferring data easily with the ability to link to external devices.
