HunterLab ColorFlex EZ Citrus, User Manual

Page: 59 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
59
64 mm (2.5 in) Glass Sample Cup
The sample cup is ideal for the analysis of powders, granules, pellets, and translucent samples.
It is recommended for use with the instrument in the port-up orientation. The cup can be filled
with the desired sample and placed at the measurement port so that the sample is measured
through the glass bottom of the cup.
Figure 94. Glass Sample Cup
Sample Cup Opaque Cover
The opaque cover provides a light trap to exclude the interference of external light on a sample
contained in the 64 mm (2.5-in) sample cup. It is placed over the filled cup at the sample port as
shown below.
Figure 95. Sample Cup Cover
Ring and Disk Set
The ring and disk set includes a plastic ring and ceramic disk designed for use inside the 64 mm
(2.5-in) glass sample cup (sold separately). The ring and disk set are recommended for use
when measuring translucent liquids, transparent liquids, and semi-solids to exclude external
light and provide a consistent white background and sample path length.
Place the ring inside the sample cup and fill the cup with the sample to a level above the ring.
Then place the ceramic disk on top of the sample (until it rests on top of the ring) with the
white portion facing the sample. If desired, cover the entire assembly with the opaque cover
(sold separately). Measure the sample at the sample port through the glass bottom of the
sample cup with the instrument in the port-up orientation.
Figure 96. Ring and Disk