Take note
of the
polarity
to connect the motor
wires on the terminal block.
2.2.2
Connect
the wires from an individual or daisy-chained
motor(s) to 1 or more
terminal blocks
.
ATTENTION.
Watch out for the polarity.
Wrong connection may damage the power
supply.
TIP.
Use good recognizable motor wiring.
E.g. red wire = plus (+) ; black wire = minus (-)
2.2.3
Mount
the power supply back to the wall.
Put
the terminal block(s) in place on the power
supply.
TIP.
Do not connect unused terminal blocks.
MANUAL
Page 8 of 13
version: 1.0
