INSTALLATION
4
Mount the Installation Brackets — Inside Mount
■
Measure 2" from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■
Center the brackets on your marks, then mark the location of the screw holes.
➤
The minimum casement depth for installation brackets is ½". Mark both of the winged
screw holes.
➤
The minimum casement depth for a fully recessed mount is 2¼". Mark the center
screw hole.
Important:
The front edges of the brackets must be level and aligned to each other.
■
Drill the screw holes using a
3
/
32
" drill bit.
Important:
Use drywall anchors when mounting into drywall.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
■
Attach the installation brackets using the screws provided.
Proceed to “Install the Shade” on page 8.
2"
Space Evenly
Jamb
Jamb
Space Evenly
2"
Minimum
1
/
2
"
Use Center Hole
When Depth Permits
Minimum
1
/
2
"
