www.HunterFan.com
1.888.830.1326
M0042-01 • 11/12/12 •
© Hunter Fan Company
17
Troubleshooting
Excessive wobbling
•
Tighten all of the blade and
blade iron screws until they
are snug.
•
Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
•
Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
•
Tighten the blade and blade
iron screws until they are snug.
•
Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan doesn’t work
•
Make sure power switch is on.
•
Pull the pull chain to make sure
it is on.
•
Push the motor reversing switch
firmly left or right to ensure that
it is engaged.
•
Check the circuit breaker to
ensure the power is turned on.
•
Make sure the blades spin freely.
•
Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10.
•
Check the plug connection in
the switch housing.
Lights dim when turned on or
do not turn on at all.
•
Make sure the wattage of the
light bulbs installed matches
the specifications on the light
sockets.