Uninstalling the Light Fixture
8-14. To uninstall the light fixture, first disconnect the plug
connectors between the black wire and the black wire with a
white stripe.
8-15. Disconnect the plug connectors between the two white wires.
8-16. Remove the two screws attaching the light kit to the lower
switch housing.
8-17. Remove the light fixture from the lower switch housing,
pulling disconnected wires through the hole in the center of
the lower switch housing.
Note:
When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
8-18. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
8-19. Install the switch housing cap and plug button to the lower
switch housing.
8-20. Once you have uninstalled the light fixture, continue
with step 8-6.
16
42103-01 • 06/06/12 • Hunter Fan Company
8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Lower
Switch
Housing
Threaded Rod
Steps 8-16 – 8-20
Male Dummy
Terminal
Female Dummy
Terminal
Step 8-19
Cap
Plug Button
