Page
9
|
Visit support.hunterindustries.com
WARNING:
Ensure the selector
switch is in the OFF position before
removing the blue bracket.
Internal Component Removal
and Installation
1. Loosen the screw and remove the pilot
valve bracket (blue) by pulling up.
4. Turn the quarter-turn screw
counterclockwise to release the lid.
Insert the snap ring removal tool (P/N
251000SP) or a flathead screwdriver into
the slot on the side of the lid and pry up
to remove.
5. Push the tabs on the back of the yardage
marker to remove it from the lid.
Service and Maintenance
2. Unscrew the solenoid. Then remove
the solenoid/two-way module
(yellow) assembly.
