7. Use the three screws from step 3 to reattach the trim bezel to the lamp holder as-
sembly. Tighten the screws securely.
8. Install a 50-Watt, GU-10 based halogen lamp (included) into each of the three
lamp sockets. Be sure to insert the pins on each lamp into the receptacle in the
fixture and twist the lamp clockwise to secure it. If you are not installing the globe,
your installation is complete and you can restore power to the ceiling fan. Other-
wise, proceed with step 9.
9. Raise the glass globe and align the indents in the glass globe with the tabs on the
fitter. Twist the glass globe clockwise to secure it. e installation is complete and
you can restore power to the ceiling fan.
Step 7
Trim Bezel
Step 8
Halogen Lamp
Step 9
Fitter
Tab
Summary of Contents for TRIBECA 28120
Page 1: ...TribecaTM InstallationInstructions 41765 01 06 22 2005 ...
Page 5: ......