manualshive.com logo in svg

Hunter Royal Oak 50466, Installation Manual, Page: 3 / 12

Share
Download
Hunter Royal Oak 50466 Installation Manual Download Page 3

PB

2

1886

1886

Do not discard the hardware bags or mix parts from 
different bags. Make note of the symbol printed on 
each hardware bag. The symbols can be used to 
identify the appropriate hardware for each step.

x4

x15

x15

x2

x2

x2

For installing the hanger bracket and wiring the fan

For installing the blades

For installing the canopy

bag

bag

bag

Hunter Pro Tip:

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 

1.888.830.1326.

bag

Spare Parts

For your convenience,  

you may receive extra fasteners.

bag

DISCA

RD

KEEP!

Remove the shipping blocks from the 
motor. 

Save the screws. They will be 

needed for blade iron installation.

Note: Some fans will have a shipping 
ring instead of shipping blocks. Please 
remove the ring and save the screws.

IMPORTANT

Lower Switch 
Housing

Upper Switch 
Housing

Blade Arm

Blade

Canopy

Downrod

Motor

Canopy Screw

Blade Screw

Grommet

Ceiling Bracket

Wood Screw

WIre Nut

Washer

Blade Arm Screw

x10

Fan style may vary.

Note: 

M0247-01 r052720

x5

x5

We recommend that you pull everything out of the box and lay it out. We have 
grouped the drawn components below with the hardware you’ll need for those 
parts. The screws below are drawn to scale to make it easier to identify what 
piece of hardware is needed to install each component.

Here is what comes in your box:

x3

bag

Assembly Screws

x3

Remote Components

Remote Control

Remote Receiver

Remote Cradle

Extra Downrod

Summary of Contents for Royal Oak 50466













Reviews:

No comments