Hunter OSCILLATING 90435 Owner'S Manual Download Page 5

5

©2011 Hunter Fan Co. 

44827-01   20111013

Figure 1

This appliance is for household use only and may be 
plugged into any 120-volt AC electrical outlet (ordinary 
household current). DO NOT use any other type of outlet.

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in 
Figure 1, and must be used with an electrical outlet that 
can accommodate the grounding pin. If your electrical 
outlet can not accommodate the grounding pin, then you 
must purchase and install one of the two types of adapters 
shown in Figure 2. 

NOTE: The adapters ARE NOT supplied with this fan. 
Read, follow, and save the instructions that are included 
with the adapter you choose. Do not use an adapter if 
your electrical  outlet can accommodate the grounding pin.

LINE CORD SAFETY TIPS

  1.  NEVER pull or yank on the cord or the appliance.
  2.  To insert plug, grasp it firmly and guide it into the outlet.
  3.  To disconnect the appliance, grasp the plug and 

remove it from the outlet.

 4.  Before each use, inspect the line cord for cuts and/

or abrasion marks. If any are found, the appliance 
should be serviced and the line cord replaced. Please 
return it to our Service Department or to an authorized 
service representative.

  5.  NEVER wrap the cord tightly around the 

appliance, as this could place undue stress on the 
cord where it enters the appliance and could cause 
it to fray and break.

  6.  DO NOT operate appliance if the line cord shows any 

damage, if the appliance works intermittently or stops 
working entirely.

Grounded

Plug

Grounding Pin

Grounded Outlet

Box Cover

 

 WARNING

Figure 2

Grounded Outlet

Box Cover

Metal

Screw

Adapter

Grounding

Means

GROUNDING

Summary of Contents for OSCILLATING 90435















Reviews: