www.HunterFan.com
1.888.830.1326
Switch Housing
Feed the 9-pin wire plug through the
center hole of the upper switch housing,
then wrap keyhole slots around the
screws and twist counterclockwise.
Screw two housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in
the hardware bag, into place and
tighten all three screws securely.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all three assembly screws could result in the
switch housing fixture falling.
Note:
Remove the shipping
ring before installing the
switch housing. See page 6
for more details.
14
M3571-01 • 06/29/16 • © 2016 Hunter Fan Company