manualshive.com logo in svg

Hunter M0094-01, Instructions Manual, Page: 15 / 17

Share
Download
Hunter M0094-01 Instructions Manual Download Page 15

www.HunterFan.com

1.888.830.1326

Light Kit (continued)

See next page for fan 
operation instructions.

CONGRATULATIONS!

YOU’RE DONE!

See next page for fan 
operation instructions.

Connect the appropriate pull 

chain pendant to each of the short 

chains coming from the finial 

and finial cap. The fan pull chain 

controls the speed: from high to 

off. The light pull chain controls 

the light fixture: on and off.

Light

Pull

Chain

Fan 

Pull 

Chain

Press the globe and globe keeper flush 

against the metal plate. Thread the 

light pull chain through the hole in the 

center of the finial cap and thread the 

fan pull chain through the hole in the 

side of the cap. Finally, thread only the 

light pull chain through the hole in 

the finial and screw the finial onto the 

threaded rod. 

Install a bulb into each of the 

sockets. When necessary, replace 

with bulbs of the same wattage.

Finial

Finial 

Cap

Globe 

Keeper

Metal 

Plate

Globe

15

M0094-01 • 

02/09/16

 • 

© Hunter Fan Company

Summary of Contents for M0094-01


















Reviews:

No comments