3. Quick Start
3.1 How to Start the Camera?
Switch ON “Power Switch”.
Note! Camera comes pre-programmed with factory default settings. So, for test
purpose, user only needs to insert a SD card and batteries to start test by powering
on.
3.2 How to Set the Functions?
a.
Switch to “Setup”, camera LCD screen is lightened, camera enter Test Mode.
Use navigation buttons “←”, “↑”, “→”, or “↓”to obtain favored settings; press “OK”
for confirmation and save the preferred change, press “Menu” to exit current
page.
b.
Switch to “ON”, camera LCD screen off, camera enter PIR Auto Mode.
c. Camera LED indicator flashes 5 times before it gets into PIR auto working mode.
Note!
For some settings, user needs to press “Menu” to save & exit the configuration
after pressing “OK” to confirm (Cam ID, Delay, Time Lapse, Timer, Password).
4. Operation List
4.1 Video/Photo Playback
Switch to “Setup”, camera LCD screen is lightened, camera enter Test Mode;
P
ress arrow button “↑” to enter Playback; Press “←” and “→” for selection, “OK” to
play photo/video.
1)
Press button “↑” again to exit.
2)
In Playback Mode, press “Menu” button to delete files, or format SD card;
press “Menu” again to exit.
4.2 Delete
a) Delete one:
delete selected photo/video
Press “OK” to choose, Press “↑” and “↓” for selection, “Yes” to confirm, “No” to
exit to previous page.
b) Delete All