1
2
3
4
Figure 1
Figure 3
PILOT LIGHT
This fan heater is equipped with a Pilot Light, which glows
whenever the heater is plugged in and turned on. It will continue
to glow even if the thermostat has cycled the heating elements
off. This feature is to prevent you from being unaware that the
heater is in operation.
5
Figure 2
OPERATING INSTRUCTIONS
1. Set the heater on a dry, level surface.
2. Make sure the Power Control is in (off) position. Plug cord
into any standard 120 V AC outlet.
(Figure 2)
3. Set the Thermostat Control all the way to (maximum).
(Figure 3)
4. Set the Power Control to for fast warm up of a room. Once
the room is comfortable, select to reduce electrical
consumption and to prevent the room from becoming too warm.
(Figure 2)
5. Your heater is equipped with an oscillation feature. If you want
to obtain a wider area of heat circulation, turn the Power Control
to or .
(Figure 2)
6. This heater is equipped with a thermostat function to control
the temperature output. To increase the heat output, turn the
Thermostat Control clockwise to . To reduce the heat output,
turn the Thermostat Control counterclockwise to .
(Figure 3)
PARTS OF THE HEATER
Parts of the heater
1. Thermostat Control
2. Pilot Light
3. Power Control
4. Safety Grille
(Figure 1)
Power Off
Low Heat Setting
High Heat Setting
Low Heat Setting with Oscillation
High Heat Setting with Oscillation
Symbols
(Figure 2)
81601-01 R20140228
