NOTE:
The dehumidifier will retain your last settings.
EMPTY BUCKET Light
If this light is on, the dehumidifier is not running. This light
indicates that you need to check:
■ If the bucket is full, empty and re-install bucket.
■
If the bucket is not in position, remove the bucket and
re-install it. Make sure the bucket fits all the way into the
dehumidifier and the bucket light is off, or dehumidifier
will not run.
Fan Speed
1. Press FAN to select fan speed.
2. Choose Low, Auto or High.
■ LOW- Reaches the desired humidity setting with lower
sound level.
■ AUTO-Achieves set humidity at normal speed.
■
HIGH-Will more quickly reach the desired humidity setting.
NOTE:
Once the humidity set point is reached, the
dehumidifier will stop running continuously, and the
fan will be off periodically.
The fan may periodically turn on, to read the
humidity level, without the compressor running.
Desired Humidity-Mode
1.Press MODE to select the desired humidity setting.
2.Choose Auto Dry,Continuous or Manual Set.
■
AUTO DRY: The dehumidifier will operate in dry mode only.
The Fan Speed can be adjusted. The Desired Humidity is
set to 50% automatically.
■
CONTINUOUS: The dehumidifier will operated
continuously.
The Fan Speed can be adjusted. The Desired Humidity can
not be adjusted.
■
MANUAL SET:The dehumidifier will operate at the
selected fan speed to the set humidity level.
If the humidity level of the room is higher than the
desired humidity setting, the compressor will turn
on. If the humidity level of the room is lower than
the desired humidity setting, the compressor will
turn off, as well as the fan.
NOTE:
The de-icing function will turn off the compressor if a low
temperature condition occurs. When the de-icer senses the
correct operating temperature, the compressor will cycle back
on.
Some freezing is normal when dehumidifiers are used
at low temperatures.
Power
Press POWER to turn on or turn off the dehumitifier.
Humidity Level
1. Press the Plus or Minus button to activate the humidity setting
program. Digits in the digital display will flash.
2. Press the Plus or Minus button again to set the desired
humidity level.
3. Digital display will stop flashing five seconds after setting,
after which the actual room humidity will be displayed.
NOTE:
Humidity can only be adjusted manually in Manual Set mode.
In Continuous and Auto Dry mode, humidity level is set automatically.
Digital Display
The display shows relative humidity or time (depending on the
setting).
1.When the dehumidifier operates in Manual Set mode,the
display shows the relative humidity of the room.
2.When the timer is selected, the display shows the time when
the dehumidifier will turn on or turn off, depending on
the setting.
%RH
H
NOTE:
The humidity displayed is only for reference. For accurate humidity,
please check a hygrometer.
5
