5
1886
1886
We know wiring is hard. Let’s make it easier.
You are going to need these:
4 Wire Nuts (these are in the bag)
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.
Wiring the Fan
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
Connect the 2 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling and ceiling plate.
Connect the black wire
(ungrounded) from the
ceiling to the black
wire from the receiver.
Connect the white wire
(grounded) from the ceiling
to both the white wire from
the receiver and the white
wire from the fan.
White
White
Black
Ung
rounded
Grounded
Connect the blue wire
from the receiver to the
blue wire (or possibly
black with white stripe
wire) from the fan.
Connect the yellow wire
from the receiver to the
black wire from the fan.
Black
Yello
w
Blue
Blue
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
1
STEP
2
STEP
Ceiling Bracket
Hanging Fan
Wiring
Canopy
Blades
Light
Bulbs
Remote
Fan style may vary.
Note:
Fan style may vary.
Note:
WARNING
The ceiling fan must be grounded. If the
ground wire for the installation site is not
present, immediately
STOP
installation and
consult a qualified electrician.
