15
41861-01 • 03/05/2010 • Hunter Fan Company
Installing the Light Fixture
1. Remove the switch housing cap and plug button from the lower
switch housing.
2. Remove the dummy terminals from the two wires in the lower
switch housing.
3. Push the wires from the light kit through the hole in the center of
the lower switch housing.
Note:
When threading the wires, push the thin plug connector
(male) through first, and then push the other plug connector
(female) through the hole.
4. Screw the threaded rod of the light fixture into the lower
switch housing.
5. Install the nut and washer from the end of the light fixture
inside the lower switch housing.
6. Connect the plug connectors between the two white wires.
7. Connect the plug connectors between the black wire and
black/white wire.
Lower Switch
Housing
Threaded Rod
Steps 3 – 5
Step 1
Cap
Plug Button
Male Dummy
Terminal
Female Dummy
Terminal
8 • Completing Your Installation With or Without a Light Fixture (continued)