manualshive.com logo in svg

Hunter Avia, User Manual, Page: 17 / 21

Share
Download
Hunter Avia User Manual Download Page 17

Monday - Friday 8am - 6pm CST

Saturday 11am - 4pm CST

(English or Español)

1.888.830.1326

www.HunterFan.com

Remote & Cradle

ON

Turn P

ow

er

CAUTION:

• Always purchase the correct 

size and grade of battery most 

suitable for the intended use.
• Replace all batteries of a set at 

the same time.
• Clean the battery contacts and 

also those of the device prior to 

battery installation.
• Ensure the batteries are 

installed correctly with regard to 

polarity (+ and -).
• Remove batteries from equipment 

which is not to be used for an 

extended period of time.

• Remove used batteries promptly.

17

To access the battery compartment, 

remove the small Phillips head screw 

that secures the battery door to the 

transmitter assembly.

Phillips 

Head 

Screw

Battery 

Door

Install two AAA batteries, found in the 

remote control hardware bag, into the 

transmitter. Clean the battery contacts prior 

to installing the batteries. Please contact 

your local battery recycling center for proper 

battery disposal information.

17

M3633-01 • 01/03/17 • © 2017 Hunter Fan Company

Summary of Contents for Avia






















Reviews:

No comments