Hunter AirMax HP980, Instructions Manual

Page: 11 / 15

Press the On/Off button to turn your air purifier on or off.
Press the Speed button to select Low, Medium, High, or Turbo fan
speed. Selected speed will display above the Speed button. (1)
Low provides the best product sound, (2) Medium offers moderate
cleaning, (3) High provides strong cleaning power, and (4) Turbo
provides maximum cleaning power.
To use timer function, select desired fan speed and press Timer
button to select between 1-12 hours of operation. Selected time,
in hours, will display above the Timer button. Your air purifier will
turn off after specified time.
When Sleep Mode is activated by pressing the Sleep Mode button,
your air purifier will operate on Low for 8 hours and lights will turn
off. After 8 hours, your air purifier will change back to original
settings and lights will come back on.
8
Filter Maintenance
REPLACE PRE-FILTER
Remove any packaging and plastic bag from the new filter before replacement.
1. Switch off and disconnect air purifier from supply socket.
2. Remove control pod. Place hands on both sides of top and gently pull up.
3. Grab filter handle and twist counter-clockwise, then pull filter up to remove from
base.
4. Remove pre-filter from HEPA filter by gently pulling away from Velcro.
5. Align new pre-filter with HEPA filter and firmly press to attach.
6. Put filter back in base, twist clockwise until filter locks into place.
7. To reattach control pod, align tabs until air purifier top locks into place.
8. Dispose of dirty filter.
REPLACE HEPA FILTER
Remove any packaging and plastic bag from the new filter before replacement.
1. Switch off and disconnect air purifier from supply socket.
2. Remove control pod. Place hands on both sides of top and gently pull up.
3. Grab filter handle and twist counter-clockwise, then pull filter up to remove from
base.
4. Remove pre-filter from HEPA filter by gently pulling away from Velcro.
5. Align pre-filter with new HEPA filter and firmly press to attach.
6. Put filter back in base, twist clockwise until filter locks into place.
7. To reattach control pod, align tabs until air purifier top locks into place.
8. Dispose of dirty filter.
We recommend periodically checking and replacing filters for optimal
performance.
• Under normal conditions of continuous use, the pre-filter should be replaced
every 6 months (approximately 3,500 hours) and the HEPA filter should be
replaced every 12 months (approximately 7,000 hours). This estimate is only a
guide. Depending on air quality and environmental factors, filters may need to be
replaced more frequently.
• IMPORTANT: Do not use water, any liquid or detergents to clean the filters.
Press the Auto button to turn on Auto Mode. Auto Mode
automatically adjusts fan speed based on air quality. If air quality is
good (low VOC and particle levels) Low Speed is used. If air quality
is bad (high VOC and particle levels), Turbo Speed is used.
Press the accent light button to turn the light on or off.
Your air purifier is programmed to indicate the VOC and Particle
levels in your indoor environment. A green light indicates good air
quality (low VOC and particle levels). A red light indicates bad air
quality (high VOC and particle levels). If light is red, we recommend
turning your air purifier to Turbo or Auto Mode.