7
FAN ASSEMBLY
Figure 8
Figure 9
1.
UNPACKING
As you unpack the fan, save the carton and packing
Follow the steps below to attach the fan head to the tripod.
materials in case you want to move or ship the unit in the
future. Carefully remove all items from the box.
NOTE: It is best to have someone hold the box while
you lift the fan and the protective packaging out of the
carton. Make sure all shipping materials are removed
from fan before operating.
NOTE: It is best to have someone hold the box while
you lift the fan and the protective packaging out of the
carton. Make sure all shipping materials are removed
from fan before operating.
Figure 7
Fully extend the pre-install tripod legs, align the holes
of the tripod bracket and the legs, install with three
position. (Figure 6)
2. Press the clip buttons in completely while sliding the
pole from the bottom pole assembly into the
pre-install tripod poles until the clip buttons appear
through the hole in the pre-install tripod poles. Place
4. Place the bolt cover from hardware bag onto the top
of the tripod bracket. (Figure 9)
3. Turn the fan head perpendicular to the fan head
slot of the tripod adapter, making sure the hole on
the fan head bracket align with the hole on the
tripod adapter. Take the bolt and nut from the
hardware bag, insert the bolt through the aligned
holes and tighten with the nut to secure the fan head
in position from the bottom of the tripod. (Figure 8)
61811-01 R20220120
Fan Head
Bracket
Fan Head
Nut
Bolt
Figure 6
Bolt Cover
