7
1886
1886
Installing the Glass
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
Fit
th
e c
an
op
y in
pla
ce as s
hown.
bag
Canopy Screw
Assembling the Light Kit
Installing the Blades:
Repeat x6
Repeat x6
x12
bag
Blade Arm Screw
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
x18
bag
Blade Screw
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Ceiling Bracket
Downrod
Hanging Fan
Wiring
Canopy
Blades
Light
LED/Glass
Remote
Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the
hardware bag.
x18
bag
Blade Nut
