11
45018-01 • 01/29/08 • Hunter Fan Company
Installing the Glass Bowl
7-1.
If you want to install the light fixture
, proceed with Step 7-2 now.
If you do not want to install the light fixture
, you need to uninstall it
now. See “Uninstalling the Light Fixture” in Step 7-9.
7-2. First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
7-3. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
7-4. Thread the fan pull chain through the hole in the metal disk. Then,
thread the fan pull chain through the hole in the center of the glass
bowl.
7-5. Thread the light pull chain through the hole in the center of the glass
bowl.
7-6. Thread the fan pull chain through the
grommet hole in the side of the cover
plate. Then, Thread the light pull chain
throught the hole in the center of the
cover plate.
7-7. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
with the grommet hole of the metal disk.
7-8. Thread the light pull chain through
the finial and screw the finial onto the
threaded rod end until tight.
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
7 • Completing Your Installation With or Without a Bowl Light Fixture
Ins
ta
ll B
ulb(s) & G
la
ss
