Hunter 44860 Installation And Operation Manual Download

Page: 41 / 77

1.  Touch a blank area of the touch screen. SELECT FUNCTION appears.
2.  Touch the   or   icon. SET SYSTEM MODE appears.
3.  Scroll through the settings with the   or   sign to select one of the

SYSTEM modes:

hEAT

( icon, red screen)

EMhEAT

(only for Heat Pump Systems)

AUTO

( and icons)

COOL

( icon, blue screen)

OFF

(no icon)

4. Touch

to return to the main screen.

The icon will show on the main screen if the system is heating; the

icon will show if the system is cooling.

NOTE: If the system is running and the or icon is touched on the main screen,

it will return you to the SET SYSTEM MODE screen. Repeat steps 2-4 to make

changes.

5. Toucvh the temperature icon ( ).
6. Touch the or sign to adjust the temperature.

44002-01 R111809

Summary of Contents for 44860














































































Search results

Summary of Contents for 44860

Reviews:

Related manuals for 44860

Brands by name

Popular brands

Hunter 44860, Installation And Operation Manual

Search results

Summary of Contents for 44860

Reviews:

Related manuals for 44860

Brands by name

Popular brands