Hunter 44826-01 Owner'S Manual Download Page 4

This appliance is for household 

use only and may be plugged into 

any 120-volt AC electrical outlet 

(ordinary household current). DO 

NOT use any other type of outlet.

This unit is suitable for grounded 

receptacle use only.

The cord has a grounded plug as 

shown in Figure 1. An adapter, as 

shown in Figure 2, is available for 

connecting three-blade grounding-

type plugs to two-slot receptacles. 

The green grounding lug extending 

from the adapter must be 

connected to a permanent ground 

such as a property grounded 

outlet box. The adapter should not 

be used if a three-slot grounded 

receptacle is available.

GROUNDING INSTRUCTIONS

FIGURE 1

FIGURE 2

LINE CORD SAFETY TIPS

  1.  NEVER pull or yank on the 

cord or the appliance.

  2.  To insert plug, grasp it firmly 

and guide it into the outlet.

  3.  To disconnect the appliance, 

grasp the plug and remove it 

from the outlet.

  4.  Before each use, inspect 

the line cord for cuts and/or 

abrasion marks. If any are 

found, the appliance should 

be serviced and the line cord 

replaced. Please return it 

to our Service Department 

or to an authorized service 

representative.

  5.  NEVER wrap the cord tightly 

around the appliance, as this 

could place undue stress on 

the cord where it enters the 

appliance and could cause it 

to fray and break.

  6.  DO NOT operate appliance 

if the line cord shows any 

damage, if the appliance 

works intermittently or stops 

working entirely.

  WARNING

Grounded

Plug

Adapter

Metal

Screw

Grounding

Pin

Grounding

Means

Grounded Outlet 

Box Cover

Grounded Outlet 

Box Cover

4

©2011 Hunter Fan Co. 

44826-01   20111014

Summary of Contents for 44826-01











Reviews: