Hunter 44377, Installation And Operation Manual

Page: 39 / 64

39
6. CREATING CUSTOM PROGRAMS
• Program times can be set in 10 minute increments.
• Program temperature can be set in increments of 1
o F (1o C).
• After 15 seconds of inactivity during programming, the
thermostat will return to Normal Display mode.
• When setting each program time, note the AM/PM indicator.
• Press H
OlD
/R
ETURN
at any time to exit Program mode and save
your settings.
• During normal operation, if no button is pressed for 5 seconds,
the unit will return to the Normal Display mode.
1. Slide the
SYSTEM SwiTcH
to HEAT or cOOl to program the
corresponding system.
2. Press p
ROGRAM
to enter Program mode. (The LCD will begin to
flash)
methods of operation (cont.)