44040-01 • 05/11/2010
40
6
Features
Additional Features
There is no need to stand at the wall where the thermostat is mounted while programming
or changing settings. Simply remove the thermostat from the wall and make the
necessary changes in the comfort of a chair. You can also set your programming and
settings before you even install the thermostat.
Armchair Programming
Your thermostat has a blue LED lamp that backlights the display for easy viewing in the
dark. When any key is pressed, the backlight will be activated. The display will stay
illuminated for 15 seconds after the last key is pressed.
Blue Backlight
In the event that power is lost, the batteries will act as backup, saving your settings
and programs.
Power Failure Protection
To protect your system from cycling, system turning on and off rapidly, your thermostat
will prevent your system from turning back on for up to 4 minutes after it has been
shut down.
System Protection
In situations where your thermostat may not seem to be operating properly or if you
just want to reset and start over, press and hold the and buttons for 5 seconds until
the screen flashes “Updated!”. This will restore the thermostat to factory condition.
Reset
