8
Figure
8
Maintenance continued
(
)
Figure
9
Filter
Supports
44134-01 • 03/20/2014
spacer
Figure
10
Figure
11
normal operation.
3.
Gently remove the
from the
,
by
carefully removing it from the
that
secure it to the
.
8.
Figure
4.
Check the side of the
facing the
for particle coverage
.
5.
If the
,
needs to be cleaned it may be
submerged in warm soapy water to clean Gently lift
.
and submerge the
.
several times to clean
6.
When complete rinse the
,
with warm
water and allow to dry completely
.
Note
:
Wet parts placed into the unit can cause
damage to the filters and or the motor of the air purifier
.
7.
Reinstall the
.
8.
Replace the rear grill The unit is now ready for
.
normal operation
.
CLEANING THE FILTER
:
1.
Turn the air purifier off and disconnect from the outlet.
2.
Remove the
on the back of the unit by
gently pulling the
away from the unit
and lift the
away. Figure 7.
3.
Remove the
from the unit. Note the directional
arrow printed on the side of the filter. The
will
be reinstalled with the same orientation. Figure 9.
4.
With a vacuum cleaner and upholstery brush
attachment, clean the filter until all particles are
removed. Do not use water or liquids to clean the
HEPA Type filter.
5.
Reinstall the
6.
Replace the
The unit is now ready for
normal operation.
REPLACING THE UVC BULB
:
Follow these instructions to remove and replace the
UVC
1.
Unplug the unit from the wall outlet
.
2.
Remove the
on the back of the unit by
gently pulling the
away from the unit
and lift the
.
7.
away Figure
screw
