43096-01 06/15/2010
3
© 2010 Hunter Fan Company
Using Your Air Purifier
1. Remove your air purifier from the box and take it out of the clear plastic protective bag.
2. Place your
HEPAtech
™ Air Purification System on a firm, flat surface. Before turning the
Air Purifier ‘on’, you need to open the front grill and remove any protective plastic that
may be surrounding the
HEPAtech
™ filter. To release the front grill, place your fingers
behind the tabs and pull forward.
3. The filter will be installed in the correct position. Grasp the filter and pull it forward. When
you replace the filter in the unit, the white filter material should be facing outward (towards
you) and the black carbon material should be hidden from view (inside the unit).
4. Replace the front grill. Be sure that the bottom tabs are in location first, and then push
the top of the grill forward until it is closed. The unit is now ready for normal operation.
NOTE:
The unit will not operate unless the door is placed in the proper position.
5. Plug the unit into a 120V electrical outlet.
6. Turn the power ‘on’ by sliding the slide switch to the appropriate speed. You may also
use the ionizer with this model. To turn the ionizer ‘on’, press the rocker switch to the ‘
’ position. The green light will be illuminated when the ionizer is ‘on’.
Cleaning And Filter Replacement
1.
Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and
cleaned in soapy water.
Be sure that all parts are completely dry before you reassemble
them to the Air Purifier.
2. Every few weeks, you should open the front grill and view the condition of the
HEPAtech
™
Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the
filter matches the dark color on the chart, you should remove the filter and replace it with
a new filter. Be sure to remove the plastic wrapping before placing the new filter into the
Air Purifier.
AIR PURIFIER PARTS
FigurE 1
