manualshive.com logo in svg

Hunter 27792, Owner'S Manual And Installation Manual

Share
Download
Hunter 27792 Owner'S Manual And Installation Manual Download Page 14

14

42834-01  •  01/27/10  •  Hunter Fan Company

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

8-14.  To uninstall the light fixture, first disconnect the plug connectors 

between the black wire and the black/white wire.

8-15.  Disconnect the plug connectors between the two white 

wires.

8-16.  Uninstall the nut and washer from the end of the light 

fixture inside the lower switch housing.

8-17.  Unscrew the threaded rod of the light fixture from the lower 

switch housing.

8-18.  Remove the light fixture from the lower switch housing 

pulling disconnected wires through the hole in the center of 
the lower switch housing.

 

Note:

  When removing the wires, pull the thin plug 

connector (male) through first, and then pull the other plug 
connector (female) through the hole.

8-19.  Install the dummy terminals (included in the sack parts) on 

the two disconnected wires in the lower switch housing.

8-20.  Install the switch housing cap and plug button to the lower 

switch housing.

8-21.  Once you have uninstalled the light fixture, continue
 

with step 7-6.

Steps 8-16 – 8-18

Male Dummy 

Terminal

Female Dummy 

Terminal

Step 8-20

Cap

Plug Button

Lower Switch 

Housing

Threaded Rod

Summary of Contents for 27792

















Reviews:

No comments

Brands by name

Popular brands

Load more brands