Assembly Steps
2. Install the rear wheel.
Turn over the car body, install the gear box to the left side
As shown in the picture,press and hold the button ,then install the two rear wheels to the
corresponding places.
After that,make an effort to pull , to ensure that the installation in position.
Install the wheel hubs to both sides.
3.Install the direction axis.
Remove the screw, nut ,
washer
and
from the direction axis.
Insert the straight end of direction
axis through the washer and hole on
the vehicle body and out through the
hole in the dashboard. (PIC1 )
Insert the bent end into the hole in
the front axle. (PIC2)
0
2
0
345
789
54
8
5
45
7
487
85
54
7
5
5
48
4
7
45
4
35
8
