6
Insert the
handlebar
closely combined
with the front
wheel assembly
, fix
in place
with a 5
x
30 screw.
Insert front wheel assembly into the
front of the bike as per the diagram
above.
After assembling the wheels to the axles, please check the
gap between the
inside of the wheel and the vehicle
(refer to
the picture) If the gap is too big, please add 2 or 3 washers on
the inside of the wheel. After tightening the nut outside of the
wheel, please turn the wheel to check if it is running smoothly,
if it is not smooth
remove 1 or 2 washers and test it again.
Open the seat by loosening screw on the seat.
Ensure red cable is connected to
the
red terminal of battery.
（1）
（2）
