Installment
1
2
3
4
Install the handlebar and steering column.
Put through the hole on the top of the ride
on body.
Ensure the end of the steering column locates
correctly into the front axle. Then push firmly down
on to the handlebar. Tighten the washer and nut.
Locate cable from the handlebar and connect
to the cable leading to the battery.
5
Tighten the rear quad by the 2 screws provided.
Tighten the bumper by the 2 screws provided.
- 1 -
6
Loosen the screw with a
screwdriver and remove seat.
