INSTALLATION
3
Mount the Mounting Clips — Inside Mount without Valance
■
The mounting clip is mounted on the headrail not on the motor cover. Mark 2 to 4" in from
each jamb. Mark the position for remaining mounting clips. Distance should be no more
than 24" apart. Mount into wood.
■
Center the mounting clips on your marks and mark the screw holes.
➤
See the table for mounting
depths.
important:
The front edges
of the mounting clips must be
level and aligned to each other.
■
Use a
3
∕
32
" drill bit to drill the screw holes.
■
Use a level to check that the mounting surface is level. Shim the mounting clips,
if necessary. Shims are not provided.
■
Attach the mounting clips with screws provided.
Warning:
Product is heavy. Mount into wood/metal
studs or into concrete with concrete anchors. Drywall
anchors are not recommended.
Proceed to “Install the Headrail” on page 11.
24" Maximu
m
Jam
Jam
Tab Positioned
Away from the Motor
2" to 4"
2" to 4"
Motor Position
Rear
Front
Minimum
3
1
/
8
"
2"
Headrail/Motor Recessed
3
7
/
8
"
3
7
/
8
"
Fully Recessed (Including Vanes)
4
7
/
8
"
4
7
/
8
"
Summary of Contents for Specialty Motorized Vertical Blinds
Page 1: ...Installation Operation Care Vertical Blinds Specialty Motorized...
Page 22: ...Notes...
Page 23: ......
