Hunter Douglas Duette, Owner'S Manual

Page: 11 / 28

11
Attach using two screws.
Attach the installation brackets to the
extension brackets using the machine
screws and nuts provided.
End Mount Applications
End mount the headrail when conventional
mounting techniques will not work, for
example, in an arched window opening.
The maximum width of an end-mounted
shade is 65".
Mount the extension brackets on a surface
at least 1 1 /
2
" wide.
Attach the installation brackets to the
extension brackets using the machine
screws and nuts provided.
INSTALL THE SHADE
CAUTION: Be sure the wires coming from
the satellite eye, satellite battery pack, or AC
transformer do not become pinched by the
brackets or headrail during installation.
NOTE: If using a satellite eye, remove the
rubber bands holding the satellite eye to the
headrail. If the satellite eye is not connected to
the shade, plug the 4-wire satellite eye connector
into the 4-wire slot marked “SAT” on the
motor housing.
Tip the headrail forward and fit the back
bottom edge into the lower lip of each bracket.
Rotate the headrail up until it snaps into the
locking tab on the back of each bracket.
WARNING:
Be sure the headrail is securely
attached to the bracket. Visually check that the
locking tab is fully engaged (see illustration).
3.
4.
1.
2.
1.
2.
1
1
/
2
"
Minimum
Extension
Bracket
Installation
Bracket
Nuts
Locking Tab
Of Bracket
Headrail
Cover
Lower Lip
Of Headrail
Headrail Properly Installed
Locking Tab
Of Bracket
Headrail
Cover
Lower Lip
Of Headrail
Headrail Properly Installed