INSTALLATION OF YOUR LAMINATOR ___________________________________________________________
Only skilled personnel should perform installation. Heed all warnings and follow the proper installation
procedures and safety guidelines.
TRANSPORT
•
Refer to outside of crate for Uncrating/Recrating instructions.
•
NOTE:
We recommend that you save the transport bolts, nuts and plates of the shipping crate for any major
moves that you plan to make with the laminator in the future.
•
Remove the transport bolts from the skid’s transport plates with 2) ¾ open-end wrenches or afjustable
wrenches. Loosen the top lock nut on the bolt and back the bolt up into the cabinet enough to clear the cabinet
castors for ease in moving.
•
Remove the air compressor and ramp from the skid. Position the ramp at the end of the skid and gently roll the
laminator off the skid. (NOTE: In the UK and Holland, Hunt Europe supplies the air compressor.)
•
Your laminator has castors to allow for easy moving. Roll the laminator into its working space area (see Working
Area Diagram).
•
Lock the castors once it is in place and remember to unlock them before moving the laminator again.
Take into account the weight of the laminator (1900-lb./864 kg
net weight) when moving. Use equipment with which the weight
can be safely lifted. The laminator is transported on a wooden
pallet (skid). If your laminator is still on its skid, you can move it
with a forklift to put it near its place of use.
*
IMPORTANT:
Set the forks of the forklift to the maximum
lifting width of the laminator, so the laminator’s center of gravity is
central between the forks.
Figure 1.
Moving the laminator with a forklift.
