Hunt Electronic HDR503 Series, User Manual

Page: 24 / 58

23
Figure 4.17 Configure Picture Overlay
2. Select the decode channel in the drop-down list in the
Decoding Channel No.
field.
3. Click
Browse
to choose a picture from the local directory, and then upload it by clicking the
Upload
button.
4. Set the X coordinate and the Y coordinate of the picture displayed on the screen to move the picture up
and down and left and right.
Note:
The picture must be in 24-bit BMP format and its width and height must be 32X pixel, with up to 128×128
resolution and 24 bits depth.
5. You can check the checkbox of
Flash
to set the display style of the picture.
6. Set the picture to show or hide.
7. Click
Save
to save the settings.
4.1.7 Checking the Connection Status
Purpose:
The connection status shows the status of the decoding status and the network connection status of the decoding
channel.
Click
Decode Operation
>
Decoding Status
>
Connection Status
to view the connection status of the current
decoding channel in IP mode, URL mode or DDNS mode.