6) WDR / BLC / DNR
MODE : OFF, WDR, BLC
WDR
: (Wide Dynamic Range, 0 ~ 4 Steps)
- To distinguish an object in both bright and dare areas
WDR_WGT : Adjust WDR level (0~4 Steps)
BLC
: Deliver a distinctive subject and background at the
same time, even when the subject is in backlight
BLC OSD
: On / Off
BLC POS-X
: Position BLC area in X axis
BLC POS-Y
: Position BLC area in Y axis
BLC SIZ-X
: Define BLC area size in X axis
BLC SIZ –Y
: Define BLC area size in Y axis
DNR
: <Off / Low / Middle / High>
- To reduce the background noise in a low luminance
environment with a filtering system.
7) DAY / NIGHT
<AUTO / COLOR / BW / EXT>
AUTO
: Automatic D/N switching according to ambient
illumination.
COLOR
: Display always color picture
B/W
: Display always B/W picture
EXT
: Automatic D/N switching by using external signals.
8) PRIVACY
To mask area which you want to mask. 31 areas selectable.
MODE
: On / Off
X-POS
: Position PRIVACY area in X axis
Y-POS
: Position PRIVACY area in Y axis
X-SIZ
: Define PRIVACY area size in X axis
Y-SIZ
: Define PRIVACY area size in Y axis
COLOR
: Define the color of masking areas. (8 colors)
TRANS
: Define the transparent of masking areas. (0~4)
9) MOTION
To detect the motion or movement in the video.
RESOLUTION
: 0~4 Steps.
SENSITIVITY
: 0~20 Steps.
10) CAMERA ID
To display a title (ID) on the monitor
MODE
: On / Off
X-POS
: Position Camera ID in X axis
Y-POS
: Position Camera ID in Y axis.
SETUP ID
: Define Camera ID
11) SYSTEM INFO
Showing System version and Date
12) RESET
13) EXIT
4) WHITE BAL.
<AUTO / PRESET / MANUAL>
AUTO
: Auto White Balance.
PRESET :
- To find the optimal setting for current luminance
environment in this mode. Set the point the camera
towards a sheet of white paper and press the Joystick
S/W. If the environment changes, readjust it.
MANUAL
- To fine-tune White Balance manually. Set White balance
first by using ATW or AWC mode before Manual mode.
After that , if there is still a white balance issue, switch to
manual mode and have a fine-tune. Manual mode allows
you to increase or decrease the red or blue factor.
5) PICT ADJUST.
BRIGHTNESS : Adjust Brightness of the lens (0~20 Steps)
COLOR GAIN : Adjust proper Color Gain (0~20 Steps)
ACE : Adoptive Color & Contrast Enhancement
SHARPNESS : Adjust proper Sharpness (0~10 Steps)
MIRROR : Change the video direction horizontally.
FLIP : Change the video direction vertically.
STILL : To hold the image to analyze precisely.
SHADING : Correct Lens (Video) shadding.
DZOOM : Digital Zoom (0~112 steps)
HLMASK : To mask a strong light at the designated area.
This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvement.
USER’S MANUAL
HD-SDI OUTDOOR DOME CAMERA
1) DISPLAY MODE
- SDI SCALE : Set the desired scale of picture
- SDI FORMAT : Set the video size. 720P & 1080P supported.
- SDI FPS : Set the frame per second of the video.
- CVBS : Set the TV system. NTSC & PAL supported.
- SDI FPS : Set the frame per second. 30 & 25FPS supported.
- CVBS_Ratio : Set the desired CVBS ratio. 4:3 & 16:9
- COLOR BAR : Check the colors with the color bar.
- SHADING DET : Check the video whether shaded or not.
- DEFECT DET : Check the defects of the video
2) LENS : Set the lens type
<MODE : DC / VIDEO / MANUAL>
3) SHUTTER / AGC : Adjust shutter & AGC setting.
- Shutter : Auto & Manual Mode selectable
- AGC : 0~ 10 levels are provided. Set the desired AGC Level.
- DSS (Digital Slow Shutter) : 4 levels are provided.
“ This feature is to enhance the low light performance, but
if it is set the higher level, the video will have an ghost
effect. Pls be sure of setting the proper level.
- FREQ : Set the proper frequency. (50Hz & 60Hz provided)
SETUP Menu Functions
