Hunt Electronic HBD-09EE, User Manual

Page: 101 / 102

102
APPENDIX C: ERROR MESSAGE LIST
ERROR MESSAGE ERROR STATUS & REASON
DISK ACCESS ERROR! H.D.D. Data structure un-normal.
The data is not recorded into the DVR or there bad sectors on
HYBRID DVR H.D.D. Please install another H.D.D. and
perform the record again.
UPDATE FILE ERROR! Please re-download the update file and update again.
FIRMWARE UPGRADE
FAILED
Please reboot the DVR and upgrade the firmware. Please send
the DVR back to repair when the HYBRID DVR is not
functional.
MEDIA ACCESS FAIL! The USB file format is incorrect (Please format the pen drive to
FAT32) or the Pen Drive is set up to ONLY READ mode when
saving the data by using Pen Drive. Please change the ONLY
READ mode.
The data cannot be burn into the CD/DVD disc. Please change
for another CD/DVD disc and backup the file in CD/DVD disc
storage.
NO FILE! There is no upgrade file within the Pen Drive or the name of
upgrade file does not correspond with the DVR format.
Please adjust the upgrade file name based on the following
information.
16CH -> UpdateN16AF.bin
09CH -> UpdateN09AF.bin
04CH -> UpdateB.bin
USB DEVICE NOT FOUND
NO USB
The pen Drive undetected. Please Unplug the Pen Drive and plug
it again.
BACKUP START TIME
ERROR
Backup start time error.
BACKUPEND TIME ERROR Backup end time error.
DISK ERROR The data cannot be burn into the CD/DVD disc. Please change
for another CD/DVD disc and backup the file.
FAN FAILED Fan Error Warning.
NO LOG DATA No Events Record.
SCHEDULE RECORD The condition is caused by trying to stop recording when
performing the schedule record.
Please setup the record to manual mode and then stop the
recording.