5-6
Operation
The application will launch once the USB to Serial adapter is connected to your Android device. You should also see
a “FTDI AOA HyperTerm v1.0” icon within your applications lists, or on one of your home screens.
1. Select “Setting” to configure attributes such as Baud Rate, Stop (bit), Data (bit), Parity, and Flow Control.
2. Select “Send File” to send/receive files between your Android and serial device.
3. Or, type your desired command(s) in the “CHAR” input field and tap the “Write” button to send data when the data
format button shows “CHAR”.
Note:
Tapping the data format “CHAR” button toggles HEX format for sending hexadecimal data command(s).
When inputting two hexadecimal characters, each character should be from “0” to “9” or from “a” to “f”, otherwise the
application will show a warning message when the “Write” button is tapped.