Power Type
Never guess when powering a pedal. Although most pedals use similar power, there are
exceptions. There are a lot of power supplies on the market, so
IF IN DOUBT, ASK!!
Your
pedal can be damaged by even a few seconds of exposure to the wrong type of power.
9V DC
Negative Center
2.1mm Barrel
Specs
Dimensions: 4.7” x 2.6” x 1.5”
Current Draw: 74 mA
Switching: True-Bypass
Controls
Dry|Wet:
Crossfades between 100% dry signal and 100% wet signal. 50/50 split at 12 o’clock
-
|
+
:
Crossfades between octave down and octave up. 50/50 split at 12 o’clock
Footswitches/LEDs
Left Footswitch:
Standard true-bypass on/off switch. The bottom LED indicates that the pedal is on.
Right Footswitch:
Channel selector. The top LED indicates which row of controls is active. When the LED is
lit, the top row is active. When the LED is unlit, the bottom row is active
Usage Tips
The Monastery allows you to seamlessly switch between two octave setting inside one compact pedal. The controls
are a bit different than most of the octave pedals on the market. It uses two independent crossfaders that allow
the signal to be unity gain no matter where the knobs are set.
If you want all three signals equal in strength, set both knobs to 12 o’clock.
The Monastery switches preset with the right footswitch. The two channels are identical, but can be set to
drastically different settings which makes it very versatile. There is a small amount of “warble” in the wet signal.
This is normal and gives it an amazing Leslie/Hammond feel for outstanding organ tones.
