Hundure RAC-510PE, Hardware Manual

Page: 48 / 55

5.2.26 System Initialization
This function is recommended to be performed by the system administrator only.
Command Code 99
System Initialization clears all records within the memory including
the card numbers, system settings, master code and restores all parameters to default
settings. After performing this function, card number and parameter should be reset.
Initialization should be performed only when the ff. occurs:
On the initial installation, set the device’s parameter to its default settings before
deployment.
If the following problem arises:
z Abnormal operation
z User wants to clear all card numbers and passwords
HUNDURE
48 RAC-510/511PE Hardware manual
Enter 99
Enter 99
Master Card/Code
(Default 30191000)
Completed