background image

USING THE PLATINUM ID 120 

HOW SONAR WORKS 

 

The Platinum ID uses the returned signals to display a detailed underwater image, and 
constantly updates the display as you travel across the water. The display informs you 
of the current depth and reveals individual fish, schools of fish, their location, bottom 
details as well as bottom hardness. 
 
An easy-to-use control also lets you enable a depth alarm for an audible alert when the 
boat is in shallow waters. 
 
The Platinum ID incorporates the best of available technologies, and offers advantages 
you won’t find in other depth sounders. 
 
The liquid crystal display offers sharp viewing even in bright, direct sunlight, and is 
backlit for nighttime operation. Advanced LCD “super-twist” technology built into the 
Platinum ID offers a wider viewing angle and higher contrast than ordinary LCD 
screens. 
 
(You will notice that the display can be seen better at certain angles. The All-in-One 
Mounting System lets you easily adjust the viewing angle for optimum viewing. Note 
also that some polarized glasses can affect your view by causing a rainbow or prism to 
appear; if so, tilt the unit slightly.) 
 
Though it includes sophisticated electronics, the Platinum ID is tough enough to take 
the pounding punishment of rough seas or a race across the lake. Completely 
waterproof - even saltwater-proof – your Platinum ID will provide you with years of 
thoroughly reliable operation.  
 
In the unlikely event that your Humminbird does require repairs, we offer an exclusive 
Service Guarantee. Complete details are provided at the end of this manual. 

Summary of Contents for Platinum ID 120





































Reviews: