5
WARNING
:
Disassembly and repair of this electronic unit should only be performed by
authorized service personnel. Any modification of the serial number or attempt to
repair the original equipment or accessories by unauthorized individuals will void
the warranty.
Materials Supplied
Installation and Operations Manual
Heading Sensor
Bag of Heading Sensor hardware
Bracket
Bag of bracket hardware
Junction box
Serial Cable (RS-232)
1m
Sensor Cable C47
Power Cable C2
Tools & Materials Needed
Safety goggles
Dust mask
Torpedo level
Pencil
Electric drill
Drill bits and hole saws:
Pilot hole
3mm
or
1/8"
Bracket screw holes
4mm, #23,
or
9/64"
Flush mount stud holes
6mm
or
1/4"
Flush mount cable hole
38mm
or
1-1/2"
Phillips screwdrivers
Marine sealant (aluminum hull)
Loctite® 242®
or
other removable thread locker (Flush Mount installation)
Deck gland (some installations)
Grommets (some installations)
Cutting pliers (some installations)
Alcohol
Heat-shrink tubing
Heat gun
Wire strippers
Slip-joint pliers
Cable ties (some installations)
Multimeter
NOTE
: Product specifications and features are subject to change without notice.
Where to Purchase Parts
Lost, broken, or worn parts should be replaced immediately.