HELIX
1. Connect the dongle cable connector to the
Communications (COM) port
on the back of the
control head.
NOTE:
The location of the Communications (COM) port will vary based on your
control head model. See your control head installation guide for more details.
2
|
Confirm the Connection
Use the following instructions to confirm wireless connection on the control head. Also, see the
section
Getting Started: Confirm Connection on the Control Head
.
1. Power on the control head.
2. Confirm the wireless remote and dongle connection:
ONIX:
Select
Settings > Network > Network Info
. Confirm the dongle and wireless remote are
listed under This Unit.
HELIX:
Press the VIEW key until the
Accessory Test View
is displayed. Confirm the dongle
and wireless remote are listed under Accessory Test.
NOTE:
If the Accessory Test View is not displayed in the view rotation, confirm it is
set to visible in the menu system.
Connecting the Dongle to the NMEA 0183 (1-2) Port on the ONIX Control Head
AS GPS NMEA cable
screw nut
Connecting the Dongle to the COM Port
on the HELIX Series Control Head
COM port
9
Installation Preparation
