91
WideSide® Sensitivity
(Advanced: with WideSide® transducer)
WideSide® Sensitivity
adjusts the sensitivity of the WideSide® beam.
Increasing the sensitivity will display additional weak returns and decreasing
the sensitivity will display few weak returns. A WideSide® transducer must be
attached to the Fishing System. The WideSide® Sensitivity menu choice is
available when Transducer Select is set to WideSide® (see
Sonar Menu Tab:
Transducer Select
) and User Mode is set to Advanced (see
Setup Menu Tab:
User Mode
).
NOTE:
The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can
visit our website at
www.humminbird.com
to order this accessory online or contact our
Customer Resource Center at
1-800-633-1468
.
NOTE:
WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the 455 kHz
sonar returns in the WideSide® View. The 455 kHz sensitivity can be adjusted without affecting
the sensitivity of the other sonar frequencies.
To change the WideSide® Sensitivity setting:
1. Make sure you have selected WideSide® Transducer and Advanced
Mode and that the WideSide® transducer is connected, then highlight
WideSide® Sensitivity on the Sonar Main Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
WideSide® Sensitivity. (-10 to +10, Default = 0)
Summary of Contents for 757c
Page 25: ...16 Structure ID represents weak returns in blue and strong returns in red...
Page 168: ...159 Notes...
Page 169: ...160 Notes...
